Material
No | DIN | AISI | CHEMICAL COMPOSITION % | Hardness
(HRC) | Hardness after tempering (HRC) | | C | Si | Mn | Cr | Ni | Mo | V | W | 100º | 200º | 300º | 400º | | 1.2080 | X210Cr12 | D3 | 2,00 | 0,25 | 0,30 | 11,50 | - | - | - | - | 63-65 | 63 | 62 | 59 | 57 | | 1.2210 | 115CrV3 | L2 | 1,15 | 0,25 | 0,30 | 0,70 | - | - | 0,10 | - | 64-66 | 64 | 63 | 57 | 51 | | 1.2363 | X100CrMoV5 1 | A2 | 1,00 | 0,30 | 0,55 | 5,15 | - | 1,05 | 0,20 | - | 63-65 | 63 | 62 | 59 | 57 | | 1.2379 | X155CrVMo12 1 | D2 | 1,55 | 0,25 | 0,35 | 11,80 | - | 0,70 | 1,00 | - | 63-65 | 63 | 61 | 58 | 58 | | 1.2436 | X210CrW12 | D6 | 2,10 | 0,25 | 0,30 | 11,50 | - | - | - | 0,70 | 64-65 | 64 | 62 | 60 | 58 | | 1.2510 | 100MnCrW4 | O1 | 0,95 | 0,25 | 1,10 | 0,55 | - | - | 0,10 | 0,55 | 64-66 | 64 | 62 | 56 | 53 | | 1.2550 | 60wCrV7 | S1 | 0,60 | 0,60 | 0,30 | 1,10 | - | - | 0,15 | 2,00 | 60-62 | 60 | 58 | 56 | 52 | | 1.2767 | X45NiCrMo4 | - | 0,45 | 0,25 | 0,35 | 1,30 | 4,00 | 0,25 | - | - | 56-58 | 56 | 54 | 50 | 46 | | 1.2842 | 90MnCrV8 | 02 | 0,90 | 0,25 | 2,00 | 0,35 | - | - | 0,10 | - | 63-65 | 63 | 60 | 56 | 50 |
Cold work tool steels are used for cutting and pressing tools, for dies and knives, for stamping and drawing tools, hobs, thread rolling tools and in many other applications due to their typical properties – high hardness, good toughness and compressive strength and high wear resistance. High availability, cost efficiency and a long tool life are the most important factors in choosing a material.
|
Products 
